Cabletron Systems ATX Specifiche

ATXMIB REFERENCE GUIDE 9031872-01

Contentsviii ATX MIB Reference Guide 10.3.18 Cabletron IPX Group ...10-8110.3.18.1 SIPXIF Table...

Chapter 7: Repeater MIB7-2 ATX MIB Reference GuiderptrOperStatus {rptrRptrInfo 2}Integer Read-OnlyThe rptrOperStatus object indicates the operational

Group InfoATX MIB Reference Guide 7-3rptNonDisruptTest {rptrRptrInfo 5}Integer Read-WriteSetting this object to selfTest (2) causes the repeater to pe

Chapter 7: Repeater MIB7-4 ATX MIB Reference GuiderptrGroupDescr {rptrGroupEntry 2}Octet String Read-OnlyA textual description of the group. This valu

Port InfoATX MIB Reference Guide 7-5rptrGroupLastOperStatusChange {rptrGroupEntry 5}TimeTicks Read-OnlyAn object that contains the value of sysUpTime

Chapter 7: Repeater MIB7-6 ATX MIB Reference GuiderptrPortAdminStatus {rptrPortEntry 3}Integer Read-WriteSetting this object to disabled (2) disables

Monitor PackageATX MIB Reference Guide 7-77.4 MONITOR PACKAGErptrMonitorPackage {snmpDot3RptrMgt 2}7.5 MONITOR RPTR INFOrptrMonitorRptrInfo {rptrMonit

Chapter 7: Repeater MIB7-8 ATX MIB Reference GuiderptrMonitorGroupTotalFrames {rptMonitorGroupEntry 2}Integer Read-OnlyThe total number of frames of v

Monitor Port InfoATX MIB Reference Guide 7-9rptrMonitorPortIndex {rptrMonitorPortEntry 2}Integer Read-OnlyThis object identifies the port within the gr

Chapter 7: Repeater MIB7-10 ATX MIB Reference GuiderptrMonitorPortAlignmentErrors {rptrMonitorPortEntry 6}Counter Read-OnlyThis counter is incremented

Monitor Port InfoATX MIB Reference Guide 7-11rptrMonitorPortRunts {rptrMonitorPortEntry 9}Counter Read-OnlyThis counter is incremented by one for each

ATX MIB Reference Guide 1-1 CHAPTER 1INTRODUCTION This manual is for system administrators responsible for configuring, monitoring, and maintaining th

Chapter 7: Repeater MIB7-12 ATX MIB Reference GuiderptrMonitorPortVeryLongEvents {rptrMonitorPortEntry 12}Counter Read-OnlyThis counter is incremented

Address Tracking PackageATX MIB Reference Guide 7-13rptrMonitorPortTotalErrors {rptrMonitorPortEntry 15}Counter Read-OnlyThe total number of errors wh

Chapter 7: Repeater MIB7-14 ATX MIB Reference GuiderptrAddrTrackEntry {rptrAddrTrackTable 1}Not-AccessibleAn entry in the table, containing address ma

ATX MIB Reference Guide 8-1CHAPTER 8PPP MIBThe unit supports RFC 1471 for PPP link control and RFC 1473 for PPP IP, and RFC 1474 for PPP Bridge suppor

Chapter 8: PPP MIB8-2 ATX MIB Reference GuidepppLinkStatusBadAddresses {pppLinkStatusEntry 2}Counter Read-onlyThe number of packets received with an i

PPP Link Control TableATX MIB Reference Guide 8-3pppLinkStatusRemoteMRU {pppLinkStatusEntry 7}Integer Read-onlyThe current value of the MRU for the re

Chapter 8: PPP MIB8-4 ATX MIB Reference GuidepppLinkStatusLocalToRemoteACCompression {pppLinkStatusEntry 12}Integer Read-onlyIndicates whether the loc

PPP Link Control TableATX MIB Reference Guide 8-5pppLinkConfigEntry {pppLinkConfigTable 1}Not-AccessibleConfiguration information about a particular PPP

Chapter 8: PPP MIB8-6 ATX MIB Reference GuidepppLinkConfigMagicNumber {pppLinkConfigEntry 4}Integer Read-WriteIf true (2) then the local node will attem

PPP Link Control TableATX MIB Reference Guide 8-7pppLqrInGoodOctets {pppLqrEntry 2}Counter Read-onlyThe LQR InGoodOctets counter for this link. pppLqr

Chapter 1: Introduction 1-2 ATX MIB Reference Guide 1.1 DOCUMENT CONVENTIONS The following conventions are used in presenting information in this ma

Chapter 8: PPP MIB8-8 ATX MIB Reference GuidepppLqrConfigPeriod {pppLqrConfigEntry 1}Integer Read-WriteThe LQR reporting period that the local PPP entit

PPP IP TableATX MIB Reference Guide 8-98.2 PPP IP TABLEpppIp [ppp 3]pppIpTable {pppIp 1}Not-AccessibleTable containing the IP parameters and statistic

Chapter 8: PPP MIB8-10 ATX MIB Reference GuidepppIpRemoteMaxSlotId {pppIpEntry 4}Integer Read-onlyThe Max-Slot-Id parameter that the remote node has a

PPP Bridge SupportATX MIB Reference Guide 8-118.3 PPP BRIDGE SUPPORTpppBridge {ppp 4}pppBridgeTable {pppBridge 1}Not-AccessibleTable containing the pa

Chapter 8: PPP MIB8-12 ATX MIB Reference GuidepppBridgeLocalToRemoteLanId {pppBridgeEntry 4}Integer Read-OnlyIndicates whether the local node will inc

PPP Bridge SupportATX MIB Reference Guide 8-13pppBridgeConfigRingId {pppBridgeConfigEntry 3}Integer Read-WriteIf false (1) then the local PPP Entity wil

Chapter 8: PPP MIB8-14 ATX MIB Reference GuidepppBridgeMediaRemoteStatus {pppBridgeMediaEntry 3}Integer Read-OnlyIndicates whether the local PPP Bridg

ATX MIB Reference Guide 9-1CHAPTER 9APPLETALK MIBThe unit supports the standard AppleTalk MIB, as defined in RFC 1243. The AppleTalk MIB consists of ei

Chapter 9: AppleTalk MIB9-2 ATX MIB Reference GuidellapIfIndex {llapEntry 1}Integer Read-OnlyThe LLAP interface to which this entry pertains. The inte

AARP GroupATX MIB Reference Guide 9-3llapNoDataErrors {llapEntry 9}Counter Read-OnlyThe total number of times this LocalTalk interface received a lapR

Related DocumentationATX MIB Reference Guide 1-3 1.2 RELATED DOCUMENTATION You may need to refer to the following documentation:• ATX User Guide –

Chapter 9: AppleTalk MIB9-4 ATX MIB Reference GuideaarpPhysAddress {aarpEntry 2}Octet String Read-OnlyThe media-dependant physical address.aarpNetAddr

ATPort GroupATX MIB Reference Guide 9-5atportType {atportEntry 3}Integer Read-WriteThe type of port, distinguished by the protocol immediately below D

Chapter 9: AppleTalk MIB9-6 ATX MIB Reference GuideatportNetConfig {atportEntry 8}Integer Read-OnlyThe configuration status of this port.atportZoneConfig

DDP GroupATX MIB Reference Guide 9-7ddpOutLongs {ddp 3}Counter Read-OnlyThe total number of long DDP datagrams which were transmitted from this entity

Chapter 9: AppleTalk MIB9-8 ATX MIB Reference GuideddpTooLongErrors {ddp 10}Counter Read-OnlyThe total number of input DDP datagrams dropped because t

RTMP GroupATX MIB Reference Guide 9-9rtmpRangeStart {rtmpEntry 1}Octet StringRead-WriteThe first DDP network address in the network range to which this

Chapter 9: AppleTalk MIB9-10 ATX MIB Reference GuideThe values for rtmpState include:• good (1)• suspect (2)• goingBad (3)• bad (4)–may be removed fro

NBP GroupATX MIB Reference Guide 9-11zipZoneNetEnd {zipEntry 4}Octet String Read-WriteThe network that ends the range for this entry. This address is

Chapter 9: AppleTalk MIB9-12 ATX MIB Reference GuidenbpIndex {nbpEntry 1}Integer Read-OnlyThe index of this NBP entry. This value ranges from 1 to the

ATEcho GroupATX MIB Reference Guide 9-13atechoReplies {atecho 2}Counter Read-OnlyThe number of AppleTalk echo replies sent.

Chapter 1: Introduction 1-4 ATX MIB Reference Guide 1.4 SNMP PRIMITIVES The major software interface between the NMS and ATX consists of one simple

Chapter 9: AppleTalk MIB9-14 ATX MIB Reference Guide

ATX MIB Reference Guide 10-1CHAPTER 10CABLETRON MIBThe Cabletron MIB {enterprise 97} is divided into several groups of parameters. The individual grou

Chapter 10: Cabletron MIB10-2 ATX MIB Reference GuidesysTrapTime {sys 4}TimeTicks Read-Write The time, in centiseconds, which should expire between th

ATX GroupATX MIB Reference Guide 10-310.3.1 Hardware Configuration Grouphw {ecs-1 1}This attribute group supplies information which describes the config

Chapter 10: Cabletron MIB10-4 ATX MIB Reference GuidehwType {hwEntry 2}Integer Read-OnlyThe module type of the slot’s most recent occupant since the u

ATX GroupATX MIB Reference Guide 10-5hwDefType {hwEntry 4}Integer Read-OnlyThe module type defined for the slot. Certain pre-defined relationships exist

Chapter 10: Cabletron MIB10-6 ATX MIB Reference Guide0x00020 ID EEPROM error0x00040 UART error (the unit will still boot)0x00080 Cam error0x00100 Inte

ATX GroupATX MIB Reference Guide 10-7For the FDDI IOM board (FIOM), any combination of the following errors may be combined; however, any error will p

Chapter 10: Cabletron MIB10-8 ATX MIB Reference GuideFor the Ethernet/802.3 IOM boards (including the single-port Ethernet board, the four port Ethern

ATX GroupATX MIB Reference Guide 10-9For the HSSI IOM board, any combination of the following errors may be combined; however, any error will prevent

MIB Primitive TypesATX MIB Reference Guide 1-5 1.5 MIB PRIMITIVE TYPES The MIB definitions in this document may reference the primitive types that ar

Chapter 10: Cabletron MIB10-10 ATX MIB Reference GuidehwPortStatus {hwEntry 10}Octet String Read-OnlyA 4 byte array, where each element represents the

ATX GroupATX MIB Reference Guide 10-11hwFirstPort {hwEntry 18}Integer Read-OnlyThe IfIndex number of the first port which resides within this module.hw

Chapter 10: Cabletron MIB10-12 ATX MIB Reference Guide0x08 CSMA/CD TP port0x09 CSMA/CD BNC port0x0a CSMA/CD FO port0x0b CSMA/CD TP port with dual RJ-4

ATX GroupATX MIB Reference Guide 10-1310.3.2 Software Configuration Groupsw {ecs-1 2}This attribute group supplies information which describes the soft

Chapter 10: Cabletron MIB10-14 ATX MIB Reference GuideswTypes {swFileset 5}Octet String Read-Only The types of files within the file set. The size of sw

ATX GroupATX MIB Reference Guide 10-15swFlashBank {swFileset 9}Integer Read-Only The bank number where the software file set resides. The possible valu

Chapter 10: Cabletron MIB10-16 ATX MIB Reference GuideconfigAnyPass {config 2}Display String Read-Write The authentication password (0-24 bytes) which m

ATX GroupATX MIB Reference Guide 10-170x0020 NO_BPDU - if enabled, prevents BPDUs from being transmitted and keeps ports in Forwarding state (this is

Chapter 10: Cabletron MIB10-18 ATX MIB Reference GuideconfigPowerPresent2 {config 11}Boolean Read-OnlyWhether the second power supply is present.configAl

ATX GroupATX MIB Reference Guide 10-19configDumpModule {config 19}Integer Read-WriteFlag to select the module to dump on a crash. If set to a value of 1

Chapter 1: Introduction 1-6 ATX MIB Reference Guide 1.6 USER FUNCTIONS The SNMP primitives may be used to accomplish the following functions: • Obta

Chapter 10: Cabletron MIB10-20 ATX MIB Reference Guide10.3.3.3 PPE Configuration Groupppe {admin 3}This attribute group permits customization and monit

ATX GroupATX MIB Reference Guide 10-21ppeExtendStats {ppe 6}Boolean Read-WriteWhether the PPE should accumulate extended statistics. Extended statisti

Chapter 10: Cabletron MIB10-22 ATX MIB Reference GuideppeStaticPreference {ppe 14}Integer Read-WriteThe value to assign to ipRouteMetric2, when adding

ATX GroupATX MIB Reference Guide 10-23ppeOspfRouteDiscards {ppe 20}Counter Read-OnlyNumber of times a route learned via OSPF was not added to the IP R

Chapter 10: Cabletron MIB10-24 ATX MIB Reference GuideppeIcmpPduMemoryFailures {ppe 29}Counter Read-OnlyNumber of unsuccessful attempts to allocate me

ATX GroupATX MIB Reference Guide 10-25ppeTftpPduMemoryAllocs {ppe 38}Counter Read-OnlyNumber of times memory was allocated for a TFTP PDU.ppeTracerout

Chapter 10: Cabletron MIB10-26 ATX MIB Reference Guide10.3.3.4 Spanning Tree Groupst {admin 4}These attributes define the ATX wide parameters for the S

ATX GroupATX MIB Reference Guide 10-27Whether a topology change is currently in progress.stActMaxAge {st 11}ObsoletestActHello {st 12}ObsoletestActDel

Chapter 10: Cabletron MIB10-28 ATX MIB Reference GuidemeshCostChange {mesh 3}ObsoletemeshCostChangeCount {mesh 4}ObsoletemeshCostChangeTime {mesh 5}Ob

ATX GroupATX MIB Reference Guide 10-29swdisWriteStatus {swdis 3}Integer Read-Only The status of the erase/write operation. The possible values are: •

Navigating Through the MIB Tree StructureATX MIB Reference Guide 1-7 Many parameters are described by existing Management Information Base (MIB) docu

Chapter 10: Cabletron MIB10-30 ATX MIB Reference Guide10.3.5 Addresses Configuration Groupaddr {ecs-1 5}This attribute group allows the NMS to examine

ATX GroupATX MIB Reference Guide 10-31If the addrFlags field is returned with a value of zero, then the desired entry does not exist. To remove an entr

Chapter 10: Cabletron MIB10-32 ATX MIB Reference GuideIf the NMS wants to create a map of which devices exist on which LANs, then the NMS should read

ATX GroupATX MIB Reference Guide 10-33addrMeshs {addr 4}Counter Read-OnlyThe number of ATM, Frame Relay, and/or SMDS addresses in the address table. T

Chapter 10: Cabletron MIB10-34 ATX MIB Reference Guide• entry-statistics = 24, if set then this is a dynamically learned customer address, which exist

ATX GroupATX MIB Reference Guide 10-35• entry-reserved = 12, if set then this is a reserved address, and the packets must be discarded.• Bits 11-10 ar

Chapter 10: Cabletron MIB10-36 ATX MIB Reference GuideaddrTotalCount {addr 13}ObsoleteaddrCost1 {addr 14}ObsoleteaddrCost2 {addr 15}ObsoleteaddrCost3

ATX GroupATX MIB Reference Guide 10-37addrTxSource {addr 27}ObsoleteaddrTxDestination {addr 28}ObsoleteaddrOldLeast {addr 29}ObsoleteaddrOldTotal {add

Chapter 10: Cabletron MIB10-38 ATX MIB Reference GuideaddrOperation {addr 41}Integer Read-Write The operation to be performed upon the described addre

ATX GroupATX MIB Reference Guide 10-39addrRxPkts {addr 46}Counter Write-Ignore The number of packets received from the address on a port that was in S

Chapter 1: Introduction 1-8 ATX MIB Reference Guide Figure 1-1 MIB Hierarchical Structure Table 1-2 provides the branch structure that is under MIB-

Chapter 10: Cabletron MIB10-40 ATX MIB Reference GuideaddrBlock {addr 53}Octet String Write-Ignore A series of 0-700 octets, which represents 0-100 ad

ATX GroupATX MIB Reference Guide 10-41snmpsmtUpstreamDescriptor {snmpsmt 3}ObsoletesnmpsmtUpstreamState {snmpsmt 4}ObsoletefddismtTable {snmpsmt 5}Not

Chapter 10: Cabletron MIB10-42 ATX MIB Reference GuidefddismtUpstreamState {fddismtEntry 5}Octet String Read-OnlyA four byte string containing the ups

ATX GroupATX MIB Reference Guide 10-43The number of large data buffers for receiving packets; must be zero for CSMA and UART ports.sifUxTxCnt {sifEntr

Chapter 10: Cabletron MIB10-44 ATX MIB Reference GuidesifFilterFlags {sifEntry 11}Integer Read-Write Special filter flags. The value can be one of the f

ATX GroupATX MIB Reference Guide 10-450x0002 TBRIDGE - shows if the port is enabled for Transparent IEEE 802.1d bridging (see sprotoBridge)0x0004 SBRI

Chapter 10: Cabletron MIB10-46 ATX MIB Reference GuidesifCongested {sifEntry 17}Boolean Read-OnlyWhether the port is out-band congested.sifState {sifE

ATX GroupATX MIB Reference Guide 10-47• OUTCOME_LOCAL =5, packet filtered (local traffic, or the destination was the ATX itself) - note that OUTCOME_LOC

Chapter 10: Cabletron MIB10-48 ATX MIB Reference GuidesifTxPackets {sifEntry 30}Octet String Read-Only A 20 byte array, containing the number of trans

ATX GroupATX MIB Reference Guide 10-49sifLan {sifEntry 38}Integer Read-Write Up to four group identifiers assigned to the port. This variable is used t

Navigating Through the MIB Tree StructureATX MIB Reference Guide 1-9 The Cabletron MIB is under the private enterprise MIB branch. To identify a va

Chapter 10: Cabletron MIB10-50 ATX MIB Reference GuidesifExpectSqe {sifEntry 43}Boolean Read-WriteWhether the port should expect SQE, also known as “h

ATX GroupATX MIB Reference Guide 10-5110.3.8 Cabletron FDDI Interfaces Groupsfddi {ecs-1 8}This group contains the Cabletron specific characteristics f

Chapter 10: Cabletron MIB10-52 ATX MIB Reference GuidesfddiRbcErrCnts {sfddiEntry 7}Counter Read-OnlyThe number of RBC errors (FIOM MIB only).sfddiRbc

ATX GroupATX MIB Reference Guide 10-530x00000200 LOST, recognition that this station’s transmitted frame was lost in the course of its circulation aro

Chapter 10: Cabletron MIB10-54 ATX MIB Reference GuidesfddiSmtConditionsStatus {sfddiEntry 13}Integer Read-WriteRequested SMT conditions which are cur

ATX GroupATX MIB Reference Guide 10-55sfddiStationDescriptor {sfddiEntry 22}Octet String Read-OnlyA four byte string containing the FDDI port’s Statio

Chapter 10: Cabletron MIB10-56 ATX MIB Reference Guide10.3.9 Cabletron UART Interface Groupsuart {ecs-1 9}This group contains the Cabletron specific ch

ATX GroupATX MIB Reference Guide 10-57suartModem {suartEntry 3}Integer Read-WriteThe expected modem signals; definitions of the different values are TB

Chapter 10: Cabletron MIB10-58 ATX MIB Reference GuideStep 2. Issue a GetRequest for the fields within {filterEntry 1} to read the first combination filte

ATX GroupATX MIB Reference Guide 10-59The filter group consists of the following parameters:filterMaxCount {filter 1}Integer Read-Only The maximum number

Chapter 1: Introduction 1-10 ATX MIB Reference Guide The get command would look like: get 1.3.6.1.4.1.97.2.9.2.0 At the beginning of each chapter in

Chapter 10: Cabletron MIB10-60 ATX MIB Reference GuidefilterTable {filter 7}Not-Accessible A list of combination filters; one per defined filter. If fewer

ATX GroupATX MIB Reference Guide 10-61• bit 12 used for filterOffsetif set, the filterOffset field applies to the data beginning from past the IP header,

Chapter 10: Cabletron MIB10-62 ATX MIB Reference GuidefilterFrame {filterEntry 6}Integer Read-Write Ethernet protocol type (1501-65535), or one (1) to i

ATX GroupATX MIB Reference Guide 10-63filterOffset {filterEntry 14}Integer Read-Write Zero-based offset of an arbitrary field within the packet. Dependin

Chapter 10: Cabletron MIB10-64 ATX MIB Reference GuidefilterPktCnts {filterEntry 20}Counter Read-Only The total number of packets which were discarded d

ATX GroupATX MIB Reference Guide 10-65rebootIndex {rebootEntry 1}Integer Read-OnlyThe slot number, beginning with 1 for the first slot. This number alw

Chapter 10: Cabletron MIB10-66 ATX MIB Reference Guide10.3.12 Debug Command Groupdebug {ecs-1 12}This attribute group provides access to the built-in

ATX GroupATX MIB Reference Guide 10-67Step 4. Set debugOperation with the “DEBUG_MODIFY” value. All of the above “sets” must be performed in a single

Chapter 10: Cabletron MIB10-68 ATX MIB Reference GuidedebugBase {debugEntry 3}Integer Read-Write The base address of the memory region to be examined

ATX GroupATX MIB Reference Guide 10-69Step 2. Wait for the GetResponse PDU. If the port is not disabled (refer to ifOperStatus), then a generic link d

Additional InterfacesATX MIB Reference Guide 1-11 5. Tell TFTP to transfer the second file, (dnld_software). This transfer should take approximately

Chapter 10: Cabletron MIB10-70 ATX MIB Reference GuidelpbkIndex {lpbkEntry 1}Integer Read-Only The port number, beginning with 1 for the first port. lp

ATX GroupATX MIB Reference Guide 10-71lpbkGoods {lpbkEntry 8}Counter Read-Only The number of packets successfully looped back. This number is automati

Chapter 10: Cabletron MIB10-72 ATX MIB Reference Guide10.3.14 Cabletron WAN Interface Groupswan {ecs-1 14}This group contains the Cabletron specific ch

ATX GroupATX MIB Reference Guide 10-73swanOverrunErrors {swanEntry 7}Counter Read-OnlyNumber of received packets with data overrun errors, since the p

Chapter 10: Cabletron MIB10-74 ATX MIB Reference Guide10.3.15 Cabletron Repeater Interface Groupsrptr {ecs-1 15}This entire group is obsolete.10.3.16

ATX GroupATX MIB Reference Guide 10-75srepeaterExtendedStats {srepeaterEntry 3}Integer Read-OnlyWhen enabled (1) the rptrMon, rptrMonPort, and rptrAdd

Chapter 10: Cabletron MIB10-76 ATX MIB Reference Guide10.3.17 Cabletron Protocol Group sproto {ecs-1 17}This group specifies which protocols apply to e

ATX GroupATX MIB Reference Guide 10-77sprotoBridge {sprotoEntry 2}Integer Read-WriteThis variable defines the bridging method to be applied to frames r

Chapter 10: Cabletron MIB10-78 ATX MIB Reference GuidesprotoAppleRoute {sprotoEntry 6}Integer Read-WriteSpecifies whether or not this port is to be use

ATX GroupATX MIB Reference Guide 10-79sprotoIpxTranslate {sprotoEntry 9}Integer Read-WriteSpecifies whether, when bridging Novell IPX frames, they are

Chapter 1: Introduction 1-12 ATX MIB Reference Guide

Chapter 10: Cabletron MIB10-80 ATX MIB Reference GuidesprotoOspf {sprotoEntry 14}Integer Read-WriteSpecifies whether the internet Open Shortest Path Fi

ATX GroupATX MIB Reference Guide 10-81• none (4)If passRif (1), the frame is bridged as is, with route discovery proceeding as expected. This option a

Chapter 10: Cabletron MIB10-82 ATX MIB Reference GuidesipxIfIndex {sipxIfEntry 1}Integer Read-OnlyIdentifies the interface (port) to which this entry’s

ATX GroupATX MIB Reference Guide 10-83sipxIfInSapPkts {sipxIfEntry 6}Counter Read-OnlyNumber of IPX Service Advertising Protocol packets received on t

Chapter 10: Cabletron MIB10-84 ATX MIB Reference GuidesipxRouteHopCount {sipxRouteEntry 4}Integer Read-OnlyThe secondary routing metric for this route

ATX GroupATX MIB Reference Guide 10-85sipxSapNetwork {sipxSapEntry 4}Octet String Read-OnlyThe IPX network address of the server providing the indicat

Chapter 10: Cabletron MIB10-86 ATX MIB Reference GuidesrtrdiscEntry {srtrdiscTable 1}Not-AccessiblesrtrdiscIfIndex {srtrdiscEntry 1}Integer Read-OnlyI

ATX GroupATX MIB Reference Guide 10-8710.3.20 IP Multicasting Groupsipm {ecs-1 20}sipmRouteTable {sipmroute 1}Not-AccessibleThe (conceptual) table lis

Chapter 10: Cabletron MIB10-88 ATX MIB Reference GuidesipmRouteParents {sipmRouteEntry 6}Octet String Read-OnlyThe bitmapped incoming port (s) for whi

ATX GroupATX MIB Reference Guide 10-8910.3.20.2 IP Multicast Stat TablesipmStatTable {sipmstat 2}Not-AccessibleThe table containing multicast routing

ATX MIB Reference Guide 2-1 CHAPTER 2TCP/IP MIB-II The ATX supports the TCP/IP MIB-II, as defined by Management Information Base for Network Manageme

Chapter 10: Cabletron MIB10-90 ATX MIB Reference GuidesipcktEntry {sipcktTable 1}Not-AccessibleDefines the attributes of a binding of IP address and ne

ATX GroupATX MIB Reference Guide 10-9110.3.22 sipNetToMedia TablesipNetToMediaTable {ecs-1 22}Not-AccessibleAn extension to the standard ipNetToMedia

Chapter 10: Cabletron MIB10-92 ATX MIB Reference GuidestrunkEntry {strunkTable 1}Not-AccessibleAn entry exists for in this table for each physical int

ATX GroupATX MIB Reference Guide 10-93strunkLastError {strunkEntry 5}Integer Read-OnlyThe reason for failure when the link is in closed, oneway, or he

Chapter 10: Cabletron MIB10-94 ATX MIB Reference GuidestrunkLinkCount {strunkEntry 7}Integer Read-OnlyThe number of links with the trunk group.strunkL

ATX GroupATX MIB Reference Guide 10-95ipMRouteSourceMask {ipMRouteEntry 3}Not-AccessibleThe network mask of the source address for which this entry co

Chapter 10: Cabletron MIB10-96 ATX MIB Reference GuideipMRouteRpfFails {ipMRouteEntry 10}Counter Read-OnlyThe number of packets which this router has

ATX GroupATX MIB Reference Guide 10-97ipMRouteNextHopState {ipMRouteNextHopEntry 3}Integer Read-OnlyAn indication of whether the outgoing interface an

Chapter 10: Cabletron MIB10-98 ATX MIB Reference GuideipMRouteInterfaceTtl {ipMRouteInterfaceEntry 2}Integer Read-WriteThe datagram TTL threshold for

ATX GroupATX MIB Reference Guide 10-99igmpCacheEntry {igmpCacheTable 1}Not-AccessibleAn entry (conceptual row) in the igmpCacheTable.igmpCacheAddress

Chapter 2: TCP/IP MIB-II2-2 ATX MIB Reference GuideHT the name TURBO followed by 24 characters which are all blanks. If the board is removable, then t

Chapter 10: Cabletron MIB10-100 ATX MIB Reference Guide10.4 APPLETALK GROUPThis group contains information relevant to Cabletron’s implementation of A

AppleTalk GroupATX MIB Reference Guide 10-101atextportNetAddress {atextportEntry 4}Octet String Read-OnlyThe AppleTalk network address configured for t

Chapter 10: Cabletron MIB10-102 ATX MIB Reference Guide

ATX MIB Reference Guide 11-1CHAPTER 11TRAPSThe unit sends Trap PDUs to the NMS, using the pre-configured NMS IP address (see configNMSAddress). If no ad

Chapter 11: Traps11-2 ATX MIB Reference Guide• egpNeighborLoss (5) – Not used by the unit.• enterpriseSpecific (6) – The unit is reporting some interes

Priority 1 TrapsATX MIB Reference Guide 11-3• hwDiagStatus – Included for any module which is not present or has failed power-up diagnostics.• hwDiagC

Chapter 11: Traps11-4 ATX MIB Reference Guide• rptrBasHealthState – Sent whenever the operational state of the repeater has changed.• hwDiagStatus – S

Priority 1 TrapsATX MIB Reference Guide 11-5• configPowerDc1 – Sent whenever the DC output of the unit’s first power supply transitions from on to off,

Chapter 11: Traps11-6 ATX MIB Reference Guide• swdisWriteStatus – Sent when a bank of Flash EPROM has been erased. If swdisWriteStatus indicates succe

Priority 1 TrapsATX MIB Reference Guide 11-7• sifRxQueues – Sent whenever the number of times that the port’s receiver has stopped receiving packets d

Interfaces GroupATX MIB Reference Guide 2-3sysName {system 5}DisplayString Read-Write An administratively-assigned name for this node. By convention,

Chapter 11: Traps11-8 ATX MIB Reference Guide• IpbkOperation – Sent whenever the unit has finished a loop back test, or a loop back error has been dete

ATX MIB Reference Guide A-1APPENDIX APACKET TRANSLATION PROCEDUREWhen you are setting up filters, if you choose to use the Offset field, it’s helpful to

Appendix A: Packet Translation ProcedureA-2 ATX MIB Reference GuideFigure A-3 TCP Header (After IP Header)acknowledgment numberwindowoptions (if any).

Chapter 2: TCP/IP MIB-II2-4 ATX MIB Reference GuideifEntry {ifTable 1}Not-Accessible A set of objects for an interface entry. The individual component

Interfaces GroupATX MIB Reference Guide 2-5ifSpeed {ifEntry 5}Integer Read-Only The port’s estimated MAC-level bandwidth, in bits per second. The band

Chapter 2: TCP/IP MIB-II2-6 ATX MIB Reference GuideifInOctets {ifEntry 10}Counter Read-Only The total number of bytes received on the port, counting t

Interfaces GroupATX MIB Reference Guide 2-7ifOutUcastPkts {ifEntry 17}Counter Read-Only The number of non-multicast packets transmitted out the port,

ATX MIB Reference Guide i NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this docume

Chapter 2: TCP/IP MIB-II2-8 ATX MIB Reference Guide• {fddi} - for FDDI ports (fddi is defined later, as {transmission 15}).• {dot5} - for Token Ring po

IP GroupATX MIB Reference Guide 2-92.4 IP GROUP ip {mib-2 4)The TCP/IP IP Group parameters are described below. ipForwarding {ip 1}Integer Read-Write

Chapter 2: TCP/IP MIB-II2-10 ATX MIB Reference GuideipInDiscards {ip 8}Counter Read-Only The number of packets that were received without error, but w

IP GroupATX MIB Reference Guide 2-11ipReasmOKs {ip 15}Counter Read-Only The number of IP datagrams which were successfully reassembled. ipReasmFails {

Chapter 2: TCP/IP MIB-II2-12 ATX MIB Reference GuideipAdEntAddr {ipAddrEntry 1}IP Address Read-Only The IP address itself. Although this field is Read-

IP GroupATX MIB Reference Guide 2-132.4.2 IP Routing TableThe TCP/IP IP routing table contains the routing information for each route currently known

Chapter 2: TCP/IP MIB-II2-14 ATX MIB Reference GuideipRouteMetric1 {ipRouteEntry 3}Integer Read-Write The primary routing metric for this route. This

IP GroupATX MIB Reference Guide 2-15ipRouteProto {ipRouteEntry 9}Integer Read-Only The manner in which the route was learned. Values include:• other (

Chapter 2: TCP/IP MIB-II2-16 ATX MIB Reference GuideipRouteInfo {ipRouteEntry 13}Object Identifier Read-Write A reference to additional MIB definitions,

ICMP GroupATX MIB Reference Guide 2-17ipNetToMediaPhysAddress {ipNetToMediaEntry 2}Physical Address Read-Write The MAC address (for PPP ports, this sh

Noticeii ATX MIB Reference Guide FCC NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

Chapter 2: TCP/IP MIB-II2-18 ATX MIB Reference GuideicmpInErrors {icmp 2}Counter Read-Only The number of ICMP messages which were received with errors

ICMP GroupATX MIB Reference Guide 2-19icmpInTimestampsReps {icmp 11}Counter Read-Only The number of ICMP “Timestamp Reply” messages received. icmpInAd

Chapter 2: TCP/IP MIB-II2-20 ATX MIB Reference GuideicmpOutRedirects {icmp 20}Counter Read-Only The number of ICMP “Redirect” messages sent. icmpOutEc

UDP GroupATX MIB Reference Guide 2-212.7 UDP GROUP udp {mib-2 7}The TCP/IP UDP Group parameters are described below. udpInDatagrams {udp 1}Counter Rea

Chapter 2: TCP/IP MIB-II2-22 ATX MIB Reference GuideudpLocalAddress {udpEntry 1}IP Address Read-Only The all zeroes IP address (0.0.0.0), which indica

SNMP GroupATX MIB Reference Guide 2-232.11 SNMP GROUP snmp {mib-2 11}The TCP/IP SNMP Group parameters are described below. snmpInPkts {snmp 1}Counter

Chapter 2: TCP/IP MIB-II2-24 ATX MIB Reference GuidesnmpInTooBigs {snmp 8}Counter Read-Only Always zero, since the unit ignores all SNMP response PDUs

SNMP GroupATX MIB Reference Guide 2-25snmpInGetNexts {snmp 16}Counter Read-Only The total number of SNMP GetNext PDUs received by the unit, which have

Chapter 2: TCP/IP MIB-II2-26 ATX MIB Reference GuidesnmpOutGenErrs {snmp 24}Counter Read-Only The total number of SNMP PDUs created by the unit, with

ATX MIB Reference Guide 3-1CHAPTER 3ETHERNET MIBThe unit supports the Ethernet MIB as defined in Definitions of Managed Objects for the Ethernet-like In

NoticeATX MIB Reference Guide iii CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT IMPORTANT: Before utilizing this product, carefully read this Li

Chapter 3: Ethernet MIB3-2 ATX MIB Reference Guidedot3InitializeMAC {dot3Entry 2}Integer Read-Write Whether the port has been initialized. Initializin

Ethernet-Like Statistics GroupATX MIB Reference Guide 3-33.2 ETHERNET-LIKE STATISTICS GROUP The dot3StatsTable is specified in a unique manner. That is

Chapter 3: Ethernet MIB3-4 ATX MIB Reference Guidedot3StatsSQETestErrors {dot3StatsEntry 6}Counter Read-Only The number of times an SQE failure ( i.e.

Ethernet-Like Collision Statistics GroupATX MIB Reference Guide 3-5dot3StatsFrameTooLongs {dot3StatsEntry 13}Counter Read-Only The number of times a r

Chapter 3: Ethernet MIB3-6 ATX MIB Reference Guide3.6 ETHERNET-LIKE CHIPSETS GROUPdot3ChipSets {dot3 8}There are no MIB variables in this group.

ATX MIB Reference Guide 4-1CHAPTER 4TOKEN RING MIBThe unit supports the Token Ring MIB as defined in IEEE 802.5 Token Ring MIB, RFC 1231 (K. McCloghrie

Chapter 4: Token Ring MIB4-2 ATX MIB Reference Guidedot5Commands {dot5Entry 2}Integer Read-WriteWhen this object is set to the value of open (2), the

Token Ring GroupATX MIB Reference Guide 4-3dot5RingState {dot5Entry 4}Integer Read-OnlyThe current interface state with respect to entering or leaving

Chapter 4: Token Ring MIB4-4 ATX MIB Reference Guidedot5Functional {dot5Entry 9}MacAddress Read-WriteThe bit mask of all Token Ring functional address

Token Ring GroupATX MIB Reference Guide 4-5dot5StatsACErrors {dot5StatsEntry 4}Counter Read-OnlyThis counter is incremented when a station receives an

Noticeiv ATX MIB Reference Guide UNITED STATES GOVERNMENT RESTRICTED RIGHTS The enclosed product (a) was developed solely at private expense; (b) con

Chapter 4: Token Ring MIB4-6 ATX MIB Reference Guidedot5StatsSoftErrors {dot5StatsEntry 11}Counter Read-OnlyThe number of Soft Errors the interface ha

Token Ring GroupATX MIB Reference Guide 4-7dot5StatsSingles {dot5StatsEntry 18}Counter Read-OnlyThe number of times the interface has sensed that it i

Chapter 4: Token Ring MIB4-8 ATX MIB Reference Guide

ATX MIB Reference Guide 5-1CHAPTER 5FDDI MIBThe ATX supports the FDDI MIB as defined in FDDI Management Information Base, RFC 1512 (Jeffery D. Case, ed

Chapter 5: FDDI MIB5-2 ATX MIB Reference Guide5.1.1 SMT TablefddimibSMTTable {fddimibSMT 2}Not-AccessibleA list of interface entries; one per FDDI por

SMT GroupATX MIB Reference Guide 5-3fddimibSMTLoVersionID {fddimibSMTEntry 5}Integer Read-OnlyThe lowest version of SMT that this station supports (co

Chapter 5: FDDI MIB5-4 ATX MIB Reference GuidefddimibSMTConfigPolicy {fddimibSMTEntry 13}Integer Read-Only#A value that indicates the configuration poli

SMT GroupATX MIB Reference Guide 5-5fddimibSMTTraceMaxExpiration {fddimibSMTEntry 17}Integer Read-WriteReference Trace_Max (corresponds to ANSI {fddiS

Chapter 5: FDDI MIB5-6 ATX MIB Reference GuidefddimibSMTTimeStamp {fddimibSMTEntry 24}Integer Read-OnlyThis variable assumes the value of TimeStamp, i

MAC GroupATX MIB Reference Guide 5-7fddimibMACSMTIndex {fddimibMACEntry 1}Integer Read-OnlyThe value of the SMT index associated with this MAC. The va

ATX MIB Reference Guide v CONTENTS CHAPTER 1 INTRODUCTION 1.1 Document Conventions ... 1-

Chapter 5: FDDI MIB5-8 ATX MIB Reference GuidefddimibMACCurrentPath {fddimibMACEntry 8}Integer Read-OnlyIndicates the path into which this MAC is curr

MAC GroupATX MIB Reference Guide 5-9fddimibMACRequestedPaths {fddimibMACEntry 14}Integer Read-Only#List of permitted Paths which specifies the Path (s)

Chapter 5: FDDI MIB5-10 ATX MIB Reference GuidefddimibMACFrameCts {fddimibMACEntry 21}Counter Read-Write*A count of the number of frames received by t

MAC GroupATX MIB Reference Guide 5-11fddimibMACFrameErrorThreshold {fddimibMACEntry 26}Integer Read-WriteA threshold (0..65536) for determining when a

Chapter 5: FDDI MIB5-12 ATX MIB Reference GuidefddimibMACHardwarePresent {fddimibMACEntry 33}Integer Read-Only This variable indicates the presence of

PATH GroupATX MIB Reference Guide 5-13fddimibPATHSMTIndex {fddimibPATHEntry 1}Integer Read-OnlyThe value of the SMT index associated with this PATH.fd

Chapter 5: FDDI MIB5-14 ATX MIB Reference Guide5.4.2 PATH Config TablefddimibPATHConfigTable {fddimibPATH 3}Not-AccessibleA table of Path configuration e

PORT GroupATX MIB Reference Guide 5-155.5 PORT GROUPfddimibPORT {fddimib 5}The FDDI PORT Group parameters are the following:fddimibPORTNumber {fddimib

Chapter 5: FDDI MIB5-16 ATX MIB Reference GuidefddimibPORTNeighborType {fddimibPORTEntry 4}Integer Read-OnlyThe type of the remote PORT as determined

PORT GroupATX MIB Reference Guide 5-17fddimibPORTPMDClass {fddimibPORTEntry 11}Integer Read-OnlyThis variable indicates the type of PMD entity associa

Contentsvi ATX MIB Reference Guide CHAPTER 4 TOKEN RING MIB 4.1 Token Ring Group...

Chapter 5: FDDI MIB5-18 ATX MIB Reference GuidefddimibPORTLerCutoff {fddimibPORTEntry 18}Integer Read-WriteThe link error rate estimate at which a lin

PORT GroupATX MIB Reference Guide 5-19fddimibPORTAction {fddimibPORTEntry 25}Integer Read-WriteA port action to be performed (corresponds to ANSI {fdd

Chapter 5: FDDI MIB5-20 ATX MIB Reference Guide

ATX MIB Reference Guide 6-1CHAPTER 6 BRIDGE MIBThe unit supports the Bridge MIB {mib-2 17} as defined in Definitions of Managed Objects for Bridges, RFC

Chapter 6: Bridge MIB6-2 ATX MIB Reference Guidedot1dBaseType {dot1dBase 3}Integer Read-Only Indicates what type of bridging this bridge can perform.

Spanning Tree GroupATX MIB Reference Guide 6-3dot1dBasePortDelayExceededDiscards {dot1dBasePortEntry 4}Counter Read-Only The number of frames discarde

Chapter 6: Bridge MIB6-4 ATX MIB Reference Guidedot1dStpTopChanges {dot1dStp 4}Counter Read-Only The total number of topology changes detected by this

Spanning Tree GroupATX MIB Reference Guide 6-5dot1dStpHoldTime {dot1dStp 10}Integer Read-Only This time value determines the interval length during wh

Chapter 6: Bridge MIB6-6 ATX MIB Reference Guidedot1dStpBridgeForwardDelay {dot1dStp 14}TimeTicks Read-Write The value that all bridges use for Forwar

Spanning Tree GroupATX MIB Reference Guide 6-7dot1dStpPortState {dot1dStpPortEntry 3}Integer Read-Only The port’s current state as defined by applicati

ContentsATX MIB Reference Guide vii CHAPTER 8 PPP MIB 8.1 PPP Link Control Table ... 8-18

Chapter 6: Bridge MIB6-8 ATX MIB Reference Guidedot1dStpPortDesignatedRoot {dot1dStpPortEntry 6}Octet String Read-Only The unique Bridge Identifier of

Source Route GroupATX MIB Reference Guide 6-9dot1dSrPortEntry {dot1dSrPortTable 1}Not-Accessible A list of information for each port of a source route

Chapter 6: Bridge MIB6-10 ATX MIB Reference Guidedot1dSrPortTargetSegment {dot1dSrPortEntry 5}Integer Read-Write The segment number that corresponds t

Source Route GroupATX MIB Reference Guide 6-11dot1dSrPortSpecOutFrames {dot1dSrPortEntry 9}Counter Read-Only The number of specifically routed frames t

Chapter 6: Bridge MIB6-12 ATX MIB Reference Guide6.4 TRANSPARENT GROUP dot1dTp {dot1dBridge 4}dot1dTpLearnedEntryDiscards {dot1dTp 1}Counter Read-Only

Transparent GroupATX MIB Reference Guide 6-13dot1dTpFdbPort {dot1dTpFdbEntry 2}Integer Read-Only Either the value 0, or the port number of the port on

Chapter 6: Bridge MIB6-14 ATX MIB Reference Guidedot1dTpPort {dot1dTpPortEntry 1}Integer Read-Only The port number of the port for which this entry co

Static Database GroupATX MIB Reference Guide 6-156.5 STATIC DATABASE GROUP dot1dStatic {dot1dBridge 5}dot1dStaticTable {dot1dStatic 1}Not-Accessible A

Chapter 6: Bridge MIB6-16 ATX MIB Reference GuideThe unit does not store the value 0. Instead, a SetRequest with a value 0 will cause the unit to auto

ATX MIB Reference Guide 7-1CHAPTER 7REPEATER MIBThe unit supports the Ethernet Repeater MIB as defined in Definitions of Managed Objects for IEEE 802.3